Next Article in Journal
Medium Term Streamflow Prediction Based on Bayesian Model Averaging Using Multiple Machine Learning Models
Previous Article in Journal
WINDS Model Demonstration with Field Data from a Furrow-Irrigated Cotton Experiment
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Interaction of the Coupled Effects of Irrigation Mode and Nitrogen Fertilizer Format on Tomato Production

1
Shijiazhuang Academy of Agricultural and Forestry Sciences, Shijiazhuang 050041, China
2
Key Laboratory for Agricultural Information Perception and Intelligent Control of Shijiazhuang, Shijiazhuang 050041, China
3
Shijiazhuang Agricultural Information Engineering Technology Research Center, Shijiazhuang 050041, China
4
Intelligent Equipment Research Center, Beijing Academy of Agriculture and Forestry Sciences, Beijing 100097, China
5
Hebei Province City Agriculture Technology Innovation Centers, Shijiazhuang 050041, China
*
Author to whom correspondence should be addressed.
Water 2023, 15(8), 1546; https://doi.org/10.3390/w15081546
Submission received: 22 March 2023 / Revised: 9 April 2023 / Accepted: 13 April 2023 / Published: 14 April 2023
(This article belongs to the Section Water, Agriculture and Aquaculture)

Abstract

:
The production efficiency and quality of tomatoes is affected by the mode of irrigation and the nitrogen forms. This study explored the impacts of different irrigation regimes, nitrogen forms, and their coupled effects on tomato production. The various irrigation regimes were set at 50%FC~90%FC (W1), 60%FC~90%FC (W2), 70%FC~90%FC (W3), and 80%FC~90%FC (W4) Furthermore, the control (CK) group followed a conventional drip irrigation regime in the local area. Nitrogen forms in this study comprised urea-based fertilizer (urea N 32%, F1), nitrate-based fertilizer (calcium ammonium nitrate N 15%, F2), and ammonium-based fertilizer (ammonium sulfate N 21%, F3). Combining these two factors yielded 15 treatment groups. The experiment was conducted in a solar greenhouse, and the soil type was sandy loam soil. The research focused on observing the yield, quality, and water–fertilizer use efficiency of tomatoes under these 15 treatment groups. The results demonstrate that irrigation had a more significant impact on the yield and nutrient accumulation rate compared to the nitrogen forms. To comprehensively evaluate the yield, quality, and water–fertilizer use efficiency of tomatoes, a combination evaluation method was employed. W3F2 produced the highest yield, CKF2 achieved the highest comprehensive quality score, and W2F2 had the highest comprehensive water and fertilizer use efficiency score. Using the fuzzy Borda model, the evaluation information of the three dimensions was combined. W3F2 ranked first, suggesting the adoption of an irrigation control regime of 70%FC to 90%FC, along with the application of nitrate-based nitrogen fertilizer during the fruit set to the harvest stage. It presented the best performance of tomato yield, quality, and water–fertilizer use efficiency across multiple dimensions.

1. Introduction

Tomato is one of the most popular fruit and vegetable crops worldwide, and in recent years, growers around the world have achieved higher yields and superior taste through improved cultivation techniques [1]. Water and fertilizer control are two important factors related to tomato yield and quality, but blindly increasing the amount of irrigation and fertilizer could lead to lower water and fertilizer use efficiency, environmental pollution, and nitrate accumulation [2]. Therefore, using irrigation sensing and control devices, such as soil moisture sensors, is an effective way to improve tomato yield, quality, and water–fertilizer use efficiency. In addition, it can improve the understanding of crop water and fertilizer requirements [3].
Sensor-based irrigation strategy, which can monitor soil content in real-time and determine when irrigation should be turned on or off, could exert significant effects on tomato production. It is generally believed that higher soil moisture content can increase crop yield [4]. Meanwhile, the reduction of irrigation can promote the accumulation of the reducing sugar, total acid, vitamin C (Vc), and total soluble solids (TSS) in fruit [5]. This effect is further impacted by other factors, particularly nitrogen fertilization. Nitrogen is the most important nutrient affecting crop growth and development, and it is a component of many essential metabolites.
There is a growing body of research on the response of various crops, such as rice [6], tobacco [7], potato [8], and lettuce [9], to different nitrogen forms. These studies have indicated that various crops exhibit differences in utilizing different nitrogen forms. Tomato, being a typical nitrate-loving crop with high nitrogen fertilizer requirements, has received considerable attention in this field. However, previous studies have primarily focused on single-factor trials or quantitative evaluations of water and fertilizer [10,11]. For example, deficit irrigation is a well-recognized water-saving strategy, achieved by the deliberate application of a sub-optimal amount of water, which may or may not result in some yield reduction. It does not enhance growth and yield as such but modifies plants’ physiological processes. It can influence the efficiency of water use, which would lead to considerable water saving [12]. According to the existing research, for tomato cultivation, the application of N30-70 (30% as a basal fertilizer and 70% as a topdressing) presents higher tomato yield, lycopene and vitamin C contents, and sugar–acid ratio in fruits, but it has lower organic acid content in fruits [13].
Additionally, the interaction between different nitrogen forms and irrigation has been noted in the literature [14,15]. For example, Chu et al. showed that the application of alternate partial root-zone irrigation (APRI) should consider the soil moisture conditions combined with the appropriate nitrogen forms, and tomato plants supplied with ammonium nitrogen at the flowering period grew better than those supplied with nitrate nitrogen [16]. However, the interaction effect still requires a comprehensive evaluation, such as that regarding the fruit yield, quality, and other indicators, especially ecological benefit indicators, such as water–fertilizer utilization efficiency, rather than merely the crop growth rate.
The tomato planting effect is a comprehensive concept that includes not only the fruit yield and quality directly related to economic benefits, but also water and fertilizer utilization efficiency related to ecological benefits. It is the sum of the interactions between different individual attributes [17]. The fruit quality is also generally classified as the taste (total soluble solids, sugar, and acid) and nutritional value (lycopene and vitamin C) [18]. Water and fertilizer utilization efficiency include the productivity of water consumption and the partial factor productivity of fertilizer application [19]. When evaluating the effects of irrigation and fertilization systems on tomato production, a comprehensive evaluation should be conducted based on three aspects: tomato yield, quality, and water–fertilizer use efficiency. A comprehensive evaluation of multiple indicators generally involves three steps: indicator selection, weight determination, and scoring evaluation [20]. There are various methods for determining the weights and evaluation scores, including a hierarchical analysis based on operations research [21], factor analysis based on multivariate statistics [22], neural networks based on computer science, and algorithms that integrate multiple evaluation methods [23]. However, it is important to note that different evaluation methods may produce different results due to varying arithmetic principles. In this regard, the fuzzy Borda method can effectively synthesize single evaluations from multiple dimensions by utilizing both the evaluation value and ranking value information [24].
The primary objectives of this study are listed as follows: (1) Investigate the effects of irrigation, nitrogen forms, and their interaction on tomato leaf growth, yield, quality, and water–nutrient use efficiency. This will clarify the different forms and interactive effects of irrigation and nitrogen on various aspects of tomato growth. (2) Determine the optimal irrigation and fertilizer system and establish a pluralistic evaluation system for tomatoes. This was accomplished by utilizing principal component analysis to evaluate the effects of tomato quality and water–fertilizer use efficiency. Additionally, the fuzzy Borda method was employed to perform a comprehensive evaluation of yield, quality, and water and fertilizer use efficiency.

2. Materials and Methods

2.1. Overview of the Test Site and Test Materials

The test was conducted at the Modern Agricultural Park of Zhao County, Hebei, China (114°78′ E, 37°76′ N). The solar greenhouse utilized in the experiment was a steel-framed structure, with a length of 90 m, a width of 8 m, and a top height of 4.5 m. The back wall was 0.5 m thick and covered with polyethylene film. The planting area was 489 m2. Sandy loam soil was used in the test site, and the nutrient conditions of the soil from 0 to 80 cm depth are shown in Table 1. The test material “Seminis 313” (Seminis Seeds (Beijing) Co., Ltd., Beijing, China) is an infinite growth variety with large fruits, medium to early maturity, and resistance to tomato mosaic virus, gray leaf spot, and yellowing leaf curl virus. On 15 March 2022, tomato seedlings were grown until they had five leaves and a heart and were 10–12 cm tall. The test was conducted from the beginning of the flowering and fruiting period (15 April 2022) to the end of the harvest period (20 June 2022), with a growth period of 66 days.

2.2. Experimental Design

The experiment was designed with two factors: irrigation systems and nitrogen forms. According to the preliminary experiments of our group and the conclusions of existing studies, maintaining the soil moisture content at a 70–90% field capacity (FC), during the flowering and fruiting period, can result in good tomato growth. Consequently, the irrigation section of this experiment was designed based on various ranges of soil moisture content, and independent soil moisture sensors were installed for each treatment to keep it constant. The irrigation limits were set at 50%FC~90%FC (W1), 60%FC~90%FC (W2), 70%FC~90%FC (W3), and 80%FC~90%FC (W4) [25].
The irrigation scheme of the control treatment (CK) was formulated according to the commonly used local irrigation method and the instruction of water-soluble fertilizer. Immediately after transplanting, 120–150 m3/hm3 of water was applied. Then, 5–7 days post-transplanting, 120–150 m3/hm3 of water was applied for seedling establishment. Approximately 45–50 days after transplanting, at the fruit expansion stage, 140–170 m3/hm3 of water was applied per cycle every 10–15 days, totaling four cycles. Around 100–105 days post-transplanting, at the harvest stage, an irrigation cycle was applied with 10–12 m3/hm3 of water, and the cycle was set at 9–12 days, totaling five cycles. All forms of nitrogen fertilizer were from China Stanley Agricultural Company. Amide nitrogen fertilizer (urea with a nitrogen content of 32%, F1), nitrate nitrogen fertilizer (Ca(NO3)2-4H2O with a nitrogen content of 15%, F2), and ammonium nitrogen fertilizer ((NH4)2SO4 with a nitrogen content of 21%, F3) were used. A total of 15 treatments were established in the cross-combination of irrigation and fertilization. During the experiment, the total nitrogen amount for each treatment was kept consistent. Various nitrogen fertilizer forms were applied for each treatment in five equal portions. All forms of nitrogen fertilization would be administered through the drip irrigation system, without foliar spraying. The fertilization for all treatments was ensured to be carried out within one week. The experiment design is presented in Table 2, which provides a clear and concise overview of the nutrient application strategy and the experimental conditions.

2.3. Experimental Method

The plot size was 3 m × 4.8 m, with 2 protective rows left between each plot. Raised-bed and wide-row cultivation was adopted, with a trapezoidal cross-section. Its ridge height was 20 cm, its bottom width was 70 cm, and its top width was 60 cm. Tomatoes were planted on the ridge surface, with a row spacing of 50 cm and a plant spacing of 30 cm. The observation path between the furrows was 90 cm wide. Drip irrigation was used, with an emitter spacing of 30 cm. One drip tape was placed for each row of tomatoes. A schematic diagram is shown in Figure 1. Each treatment had 64 plants, each of which was repeated three times, and all repetitions were studied separately nine times. Figure 2 shows the different stages of tomato production.
To determine the soil field capacity in the tomato cultivation experiment, soil moisture multi-profile three-dimensional monitoring equipment (Agricore Technology, Beijing, China) was utilized. The calculation method employed was moving averages. The equipment was buried in the middle ridge of each plot, at a distance of 15 cm from the plant in the north-south direction. In the test area, the soil 0~40 cm deep was initially found to be supersaturated prior to planting. Continuous data of the soil water content were gathered from the 0 to 40 cm depth layer one day before irrigation. The soil water content data were smoothed by the sliding average method with a 4-h time interval.
The sliding average of the soil moisture content data was analyzed to identify the inflection point during the receding process. Specifically, when the change rate between the current time point and the previous 4th time point did not exceed 0.4%, the 4-h average soil moisture content of the soil layer measured at the current time point and the previous three time points was considered the field capacity of the soil layer.
Undisturbed soil samples were collected using a ring knife at the same soil layer. The collected soil samples were then brought back to the laboratory, saturated with water, and placed on dried soil to allow the latter to absorb the gravitational water in the undisturbed soil. Next, 15 g of undisturbed soil was placed into an aluminum box with a constant weight (m0) and immediately weighed (m1). The soil sample was then dried at 105 °C to a constant weight, after which it was weighed again (m2). The field capacity X of the soil layer was calculated using Equation (1) based on the measurements of the undisturbed soil samples. The procedure was performed three times with the average value of the results being reported.
X = ( m 1 m 2 ) × 1000 m 2 m 0
The results of the two field capacity measurement methods are presented in Table 3. The relative error between the measurements was within ±2%, indicating that the soil moisture multi-profile three-dimensional monitoring equipment was capable of accurately and automatically monitoring the soil field capacity.
During the experiment, nitrogen fertilizer was applied in each plot, and 589.95 kg/hm2 of agricultural potassium sulfate with a potassium content of 50% was applied uniformly to ensure consistent nutrient application amounts throughout the entire growth period. The experiment design is presented in Figure 3, which provides a clear and concise overview of the experimental design.

2.4. Project Measurement and Methods

2.4.1. Solar Greenhouse Environmental Conditions and Water Consumption

The hourly air temperature and humidity were measured using a Greenhouse Doll II (Agricore Technology, Beijing, China), and the data for environmental conditions during the experiment are presented in Figure 4. Throughout the entire growth period, the air temperature ranged from 8.57 °C to 41.22 °C, and the air humidity ranged from 11.9% to 95.86%.
To monitor the water used for irrigation during the entire growth period, water meters were installed in each treatment, and the amount of irrigation water used (in m3) was recorded. The amount of irrigation water used per tomato plant (in m3/plant) was then calculated based on the planting density. Throughout the growth period, the W1, W2, W3, and W4 treatments utilized a total of 25.5 m3, 29.22 m3, 31.47 m3, and 32.48 m3 of water, respectively. Figure 5 illustrates the cumulative daily water consumption under different treatments, indicating an increasing trend in the total water consumption with increases in the irrigation threshold. The CK treatment, irrigated with 26.6 m3 of water using the local water-saving irrigation system, was used as the control. Compared to CK, the W1 treatment achieved 4.85% water savings.

2.4.2. Tomato Yield and Quality

During the harvest period, one or two panicles of fruit were randomly selected from three plants, and the fruit weight was measured using a balance with an accuracy of 0.01 g to determine the yield per plant (in kg/plant). Five fruits with uniform size and hardness were randomly selected from each treatment for analysis. The content of vitamin C (VC in mg/100 g) was determined using the 2,6-dichlorophenol indophenol sodium titration method [26]; the soluble sugar (in mg/100 g) was measured using the Rhein–Enon’s method [17]; the lycopene (in mg/100 g) was measured using the spectrophotometer method [27]; the titratable acid (%), which was determined as the major acid in tomato, was calculated using the NaOH titration method [28]; and the total soluble solids (TSS, %) were measured using the PAL-1 digital sweetness tester (Atago, Tokyo, Japan). According to the Fang. L (2020), the total soluble solid includes the amount of soluble sugar in the fruit [29]. The sugar–acid ratio was calculated as the value of total soluble solids divided by that of the titratable acid [30]. Each measurement was repeated three times, and the average value was used for further analysis.

2.4.3. N, P, and K Contents of Plants

During the harvest period, the samples were randomly selected from the south, middle, and north of each plot, with a total of three samples. The process was conducted three times in total. The roots were carefully dug, and the above-ground parts were kept intact. The plant samples were then subjected to a controlled drying process at 105 °C to eliminate all the moisture content. Subsequently, the roots, stems, and leaves were heated to 80 °C, while the fruits were heated to 50 °C and dried to a constant mass. Finally, the dry biomass (kg) of each plant sample was precisely weighed using a balance with an accuracy of 0.01 g. The harvested plant samples were ground and thoroughly mixed. Their N content (%) was determined using the Kjeldahl method [31], the P content (%) was measured using a spectrophotometer method [32], and the K content (%) was determined using a flame photometric method [33].

2.4.4. Water Use Efficiency, Nutrient Accumulation, and Use Efficiency

The water use efficiency was calculated based on the yield and water consumption:
I W U E y = Y / E T
where I W U E y is the water use efficiency (kg/m3), Y is the yield per plant (kg/plant), and E T is the water consumption per plant (m3/plant).
The nutrient use efficiency was calculated based on the plant biomass and the N, P, and K contents [34,35]:
N U E = B × N C A × 100 %
where N U E is the nutrient use efficiency (%), B is the plant biomass (g), N C is the nutrient accumulation (%), and A is the nutrient supply (g/plant).

2.5. Data Analysis Methods

The measured tomato data were averaged, and the standard error of the mean (SEM) was included in the graph. One-way analysis of variance (ANOVA) [36] was employed to determine whether differences between the data were significant. Additionally, two-way ANOVA [37] was utilized to investigate whether interactions existed among the two factors, the irrigation, and the nitrogen forms. If the null hypothesis was rejected, Duncan’s multiple range test (Duncan’s MRT, p < 0.05) was utilized as a post-hoc test for variance analysis [38].
The data were subjected to multivariate statistical analysis using IBM SPSS Statistics 23 [39]. Spearman correlations (p < 0.05) were calculated for all indicators, and all indicators were normalized and then evaluated using principal component analysis [40] for the tomato yield, quality, water–fertilizer use efficiency. Then, the evaluation values and rankings of these three dimensions were evaluated in combination with the fuzzy Borda method [41]. The experimental data were organized and plotted using Microsoft Excel 2007 software.
The fuzzy Borda method calculated the membership degree of each evaluation item to the evaluation index score according to Equation (4), determining the ability of the evaluation items to obtain good evaluation results.
μ i j = x i j min i { x i j } max i { x i j } min i { x i j } × 0.9 + 0.1
where x i j represents the score of the ith treatment in the jth evaluation method; μ i j represents membership degree of the ith item under the jth evaluation method.
The fuzzy number and fuzzy frequency of the ith item in the hth position were calculated according to Equations (5)–(7).
ρ h i = j = 1 n δ h i μ i j
W h i = ρ h i h ρ h i
where h is the number of evaluation item indicators.
δ h i = { 1 ,   the   i th   item   in   the   h th   position 0 ,   others
Converted the ranking into scores based on Equation (8):
Q h i = 1 2 ( q h ) ( q h + 1 )
where Q h i is the score of the ith item in the hth position, and q is the total number of evaluation indicators.
The fuzzy Borda count of the ith term was calculated based on Equation (9):
B i = W h i Q h i

3. Results

3.1. Effect of Different Treatments on Tomato Yield and Quality

Table 4 shows that there were significant differences in the tomato yield under different irrigation levels (p < 0.05). The nitrogen fertilizer treatment and the interaction effect of the water and fertilizer had no significant effects on the tomato yield. The highest yield was observed in W3F2, with 72.21%, 97.92%, 44.67%, and 56.16% increases compared to the CKF2, W1F2, W2F2, and W4F2 treatments, respectively, and 9.62% and 34.75% increases compared to W3F1 and W3F3 at the same irrigation level. The yield per plant demonstrated an increasing trend followed by a decreasing trend with the increase in the irrigation lower limit, and the highest yield was achieved under the W3 irrigation level, showing increases of 51.81%, 46.51%, 18.59%, and 25.69% when compared to CK, W1, W2, and W4, respectively. The highest yield was obtained under the F1 treatment, showing increases of 13.08% and 17.91% compared to F2 and F3, respectively.
Different treatments had significant effects on the Vc, soluble sugar, TSS, sugar–acid ratio, and lycopene content of the tomato fruits. Meanwhile, different irrigation and nitrogen forms as well as the water–fertilizer interaction presented effects on all the indicators of tomato quality, which reached highly significant levels (p < 0.01). The Vc, soluble sugar, and TSS contents were the highest under the CK1F2 treatment, where the Vc content increased by 31.25%, 10.53%, 13.50%, and 19.98% compared to W1F2, W2F2, W3F2, and W4F2, respectively. The soluble sugar increased by 3.61% to 36.08%, and the TSS increased by 8.00% to 29.50%, respectively.
With respect to the irrigation level, the increase in the irrigation lower limit led to an increase in the irrigation water volume, followed by a decreasing trend in the Vc, soluble sugar, and TSS. The highest sugar–acid ratio was observed in W1F2 (11.14), followed by CKF2 (10.46), ranking as W1 > CK > W2 > W3 > W4 under different irrigation treatments, which the appropriate sugar–acid ratio is 6.9 to 11 [42]. The lycopene presented a significant difference among the various treatments. The highest lycopene could be witnessed at W3F1, and it was higher than that of the lowest treatment 69.43%. F2 was significantly better than F1 and F3 in all indicators of tomato quality under different nitrogen forms (p < 0.01).

3.2. Effects of Different Treatments on Water and Fertilizer Use Efficiency of Tomato

Figure 6 presents the significant differences in the nutrient accumulation and use efficiencies in tomato under the different treatments. W2F2 demonstrated the highest accumulation and use rates for all nutrients compared to the other treatments. The N, P2O5, and K2O accumulations in W2F2 were 10.76 g/plant, 1.80 g/plant, and 15.86 g/plant, and the use efficiencies were 74.58%, 31.83%, and 77.06%, respectively. Compared to the other treatments, W2F2 showed significant increases in the N content (12.46% to 80.16%), the N use rate (12.47% to 80.19%), the P2O5 content (7.80% to 125.01%), the P2O5 use rate (7.79% to 85.81%), the K2O content (12.24% to 128.20%), and the K2O use rate (12.20% to 128.06%).
Highly significant differences were observed in the nutrient accumulation of tomato under different irrigation treatments (p < 0.01). Furthermore, there were no significant differences in the accumulation of N and K, but significant differences were found in the accumulation of P under the three nitrogen fertilizer treatments (p < 0.05). There were significant differences in the accumulation of N, P, and K under the water–fertilizer interaction (p < 0.01). The effects of different irrigation treatments, nitrogen fertilizer treatments, and the interaction effects of water and fertilizer on the use efficiency of N, P, and K reached a highly significant level (p < 0.01).
No significant differences were observed in the water use efficiency of tomato among the 15 groups under different water and fertilizer treatments. Furthermore, there were no significant differences in the water use efficiency of tomato under the same irrigation regime with different nitrogen forms and water–fertilizer interaction effects. However, different irrigation treatments at the same fertilization level had a significant effect on the water use efficiency of tomato, with p < 0.05. The water use efficiency of W3F2 was the highest at 43.430 kg/m3, but did not reach a significant level. Under the same nitrogen fertilizer treatment, it was 67.04%, 39.44%, 34.29%, and 61.17% higher than that of CKF2, W1F2, W2F2, and W4F2 with different irrigation levels. Under the same irrigation level, it was 9.59% and 34.72% higher than that of W3F1 and W3F3 under different nitrogen fertilizer treatments.

3.3. Comprehensive Evaluation of the Effect of Different Water and Fertilizer Treatments

3.3.1. Correlation between Indicators

The yield per plant, Vc, soluble sugar, TSS, sugar–acid ratio, lycopene, water use efficiency, N use efficiency, P2O5 use efficiency, and K2O use efficiency are represented by U1~U10. The correlations among the indicators are tabulated in Table 5. According to the results, the yield per plant had a negative correlation with the soluble sugar, TSS, and sugar–acid ratio, while showing a highly significant positive correlation with the water use efficiency. Additionally, Vc was found to be positively correlated with the soluble sugar, and the soluble sugar had a positive correlation with the TSS and sugar–acid ratio. On the other hand, the soluble sugar had a negative correlation with the P use efficiency and K use efficiency. The TSS showed a positive correlation with the sugar–acid ratio. The sugar–acid ratio was highly negatively correlated with the P use efficiency and negatively correlated with the K use efficiency. There was no significant correlation between the lycopene and the other indicators. There were highly significant positive correlations among the N use efficiency, P2O5 use efficiency, and K2O use efficiency.
The results demonstrate that the indicator data reflected both overlapping and distinct information. To better evaluate the comprehensive effects of the different irrigation and fertilization systems, a comprehensive multi-item evaluation was necessary.

3.3.2. Analysis and Evaluation of Tomato Yield, Quality, and Water–Fertilizer Use Efficiency

Principal component analysis was used to analyze the indicators of tomato quality and water–fertilizer use efficiency, respectively. The Vc (U2), soluble sugar (U3), TSS (U4), sugar–acid ratio (U5), lycopene (U6), water use efficiency (U7), N use efficiency (U8), P2O5 use efficiency (U9), and K2O use efficiency (U10) were normalized and then subjected to principal component analysis, respectively.
The contributions of the eigenvalues of the tomato quality indicators are shown in Table 6, and two principal components were extracted. The variance interpretation rates of the two principal components were 59.965% and 20.757%, respectively, and the cumulative variance interpretation rates were 80.723%. The principal component expression is:
Y 1 = 0.413 U 2 + 0.556 U 3 + 0.479 U 4 + 0.520 U 5 0.141 U 6
Y 2 = 0.401 U 2 0.082 U 4 + 0.003 U 5 + 0.912 U 6
The greatest influences on the first and second principal components were the Vc and soluble sugar, respectively, and the first two principal components were used as the evaluation indicators of the tomato quality, with the integrated evaluation equation of
Y = 0.743 Y 1 + 0.257 Y 2
The contributions of the eigenvalues of the water and fertilizer use efficiency indicators are presented in Table 7, and one principal component was extracted. The cumulative contribution of this principal component was 69.317%, which can replace the original four variables to evaluate the water and nutrient use efficiencies under different treatments. The principal component expression is:
Z 1 = 0.109 U 7 + 0.583 U 8 + 0.561 U 9 + 0.578 U 10
The comprehensive score was calculated according to the first principal component:
Z = Z 1
The comprehensive score and ranking of principal components of the tomato quality and water and fertilizer use efficiency were obtained according to Equations (12) and (14). Table 8. lists the rankings and scores reflecting the three dimensions of tomatoes.

3.3.3. Comprehensive Evaluation of the Effect of Different Water and Fertilizer Treatments Using Fuzzy Borda

The evaluation information of the three dimensions of yield, quality, and water–fertilizer use efficiency was evaluated in combination using the fuzzy Borda method to obtain the comprehensive score and ranking. The results are shown in Figure 7, where they are ranked by area size. The W3F2 scored 78.208, ranking first, and indicating that under the treatment with 70%FC~90%FC as the irrigation condition and with nitrate nitrogen fertilizer, the multi-dimensional optimal comprehensive evaluation of the tomato yield, quality, and water–fertilizer use efficiency can be achieved.

4. Discussion

4.1. Relationships among Tomato Yield, Quality Indicators, and Water and Fertilizer Use Efficiency Indicators

The optimal regression equation was obtained by a stepwise regression method through a path analysis, with tomato yield (U1) as the dependent variable and the indicators of tomato quality and water and fertilizer use efficiency (U1~U10) as independent variables: U 1 = 1.039 0.156 U 5 + 0.129 U 7 (R2 = 0.782). This implies that the sugar–acid ratio and water use efficiency could explain 78.3% of the variation in the yield per plant. The path analysis showed that the sugar–acid ratio had a significant negative correlation with the yield, while the water use efficiency had a significant positive correlation with the yield, with a path coefficient of 0.947. These results suggest that improving the tomato water use efficiency can be a key factor in increasing tomato yield.

4.2. Effects of Irrigation Lower Limit and Nitrogen Forms and Water-Fertilizer Interactions on Tomato Yield and Quality

Soil moisture and fertility are important factors that significantly affect crop yield and quality. Research on the irrigation and fertilization of tomatoes under facility growing conditions has been widely conducted by scholars both domestically and abroad [43,44]. Many studies have demonstrated that irrigation, fertilization, and intercropping practices generate certain effects on crop yield and quality [45,46,47].
In this study, significant differences were observed in the yield among 15 groups of treatments with different irrigation and fertilization regimes. Additionally, highly significant yield differences were observed among W1, W2, W3, W4, and CK under different irrigation treatments (p < 0.01). However, no significant differences in yield were observed among F1, F2, and F3 under different nitrogen forms, and no significant effects of the water–fertilizer interaction were observed on the tomato yield.
The treatment that resulted in the highest yield per plant was W3F2, with a yield of 5.695 kg. The variation in the yield among treatments followed a trend of increasing and then decreasing with increases in the irrigation lower limit. This can be interpreted that the gradual increase in the irrigation starting conditions, from 50%FC to 80%FC for each treatment W1 to W4, resulted in a gradual increase in the irrigation water volume throughout the entire growth period of the tomato. However, as the lower limit continued to increase, the air permeability of the soil decreased, which inhibited the ability of the root system to absorb nutrients, ultimately resulting in a decrease in the fruit yield [48].
In this study, the irrigation and nitrogen forms affected all indicators of tomato quality at highly significant levels (p < 0.01), while the water–fertilizer interaction effects were also found to have highly significant effects on the tomato quality (p < 0.01). Irrigation and fertilization had profound impacts on the tomato fruit quality through different mechanisms. Irrigation influenced the water content of the fruit, thereby altering its nutrient content and quality. The nitrogen form affected the activity of key enzymes involved in the organic acid metabolism, such as phosphoenolpyruvate carboxylase (PEPCase), as well as nitrogen metabolism enzymes, such as nitrate reductase (NR) and glutamine synthetase (GS) in the fruit, which in turn modulated the sugar–acid ratio, thereby impacting the flavor and quality of the tomato [49].
The relationship model between the quality comprehensive score (Y) and the tomato yield (U1) was determined through a quadratic curve fitting method, as shown in Equation (15).
Y = 26 . 35 12 . 18 U 1 + 1.35 U 1 2
As depicted in Figure 8, the quality score shows a decreasing and then increasing trend with an increasing yield. The lowest quality score was observed when the yield per plant increased to 4.51 kg/plant, after which the quality score gradually increased with further increases in the yield. The reason for this situation may have been that there was a negative correlation between the quality score and the yield before the yield per plant increased to 4.51 kg. With the increase in the irrigation volume and appropriate fertilization, both the yield and quality improved simultaneously.

4.3. Effects of Irrigation Lower Limit and Nitrogen Forms and Water-Fertilizer Interactions on Water and Fertilizer Use Efficiency of Tomato

The results show that the different irrigation treatments, under the same amount of fertilization, had significantly different effects on the tomato water use efficiency (p < 0.05). The highest water use efficiency, 38.432 kg/m3, was observed when the irrigation lower limit was set at 70%FC. However, no clear trend was observed between the water use efficiency and the irrigation lower limit. This was because different water and nitrogen supply patterns affected the water–fertilizer use efficiency of plants [50,51]. Wang et al. concluded that reduced soil water regimes under N fertigation caused the partial closure of the stomata via the decreased plant water status and intensified root-to-shoot abscisic acid (ABA) signaling, resulting in an improved intrinsic water use efficiency.
The results of this study indicate that the effects of irrigation schemes, nitrogen forms, and their interaction on the utilization efficiency of N, P, and K were highly significant. The principal component analysis revealed that the highest comprehensive score for water and fertilizer use efficiency (W2F2) was achieved when the irrigation lower limit was set to 60%FC. Studies have shown that there is a positive correlation between the appropriate application of nitrate nitrogen and yield and nutrient element use efficiency in crops such as maize [52] and cotton [53]. The results of this study indicate that under water–fertilizer interaction, an appropriate amount of water and nitrogen can greatly enhance plant and fruit growth, resulting in improved nutrient element use efficiency while maintaining a certain level of fertilization.
In future research, the performance of water and fertilizer use efficiency on various tomato cultivars should be discussed, and the various requirements of irrigation volume in different growth periods of tomato should be explored.

5. Conclusions

The water–fertilizer interaction has highly significant impacts on the quality indicators of tomato, such as the Vc, soluble sugar, TSS, sugar–acid ratio, and lycopene content. Furthermore, the interaction also significantly influences the accumulation and use efficiency of the N, P, and K in tomato. These findings indicate that the improvement in the water use efficiency of tomato plays a crucial role in increasing tomato yield. The optimal irrigation and fertilization scheme for the spring crop cultivation of facility tomato in this region is determined as follows: The soil moisture should be controlled at 70%FC from the fruit setting to the harvest period. At the same time, the application of nitrate nitrogen fertilizer could achieve the best effects on the tomato yield, quality, and water and fertilizer use efficiency.

Author Contributions

Conceptualization, Y.H. and G.-Y.T.; methodology, Y.-R.Y.; software, Y.-R.D.; validation, Y.-F.K.; formal analysis, Y.H. and G.-Y.T.; investigation, J.-X.Y.; resources, J.-X.H.; data curation, Y.H.; writing—original draft preparation, Y.H.; writing—review and editing, Y.-R.Y.; visualization, Y.-R.D.; supervision, J.-X.Y.; project administration, G.-Y.T.; funding acquisition, G.-Y.T. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by Hebei Province Key R&D Program Project (21327410D), Hebei Province Key R&D Program Project (22327401D), and Shijiazhuang Municipal Science and Technology Research and Development Program (221490072A).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

Appendix A

Table A1. Effects of different treatments on IWUE and NUE of tomato.
Table A1. Effects of different treatments on IWUE and NUE of tomato.
TreatmentN
Accumulation
(g/plant)
P
Accumulation
(g/plant)
K
Accumulation
(g/plant)
N Use
Efficiency
(%)
P Use
Efficiency
(%)
K Use
Efficiency
(%)
Water Use
Efficiency
(kg/·m3)
W1F17.09 ± 0.77 def1.03 ± 0.16 def9.09 ± 0.36 f49.15 ± 0.94 h18.24 ± 0.30 h44.16 ± 0.32 j32.55 ± 8.51 a
W1F25.97 ± 1.00 f0.80 ± 0.00 f6.95 ± 0.18 g41.39 ± 1.11 j14.15 ± 0.49 j33.79 ± 1.60 k31.15 ± 10.91 a
W1F37.32 ± 0.02 def1.31 ± 0.16 bcde8.83 ± 0.13 f50.73 ± 0.90 g23.11 ± 0.70 f42.91 ± 0.79 j30.07 ± 5.24 a
W2F19.57 ± 0.30 ab1.49 ± 0.08 abcd14.13 ± 0.77 b66.31 ± 1.05 b26.40 ± 0.58 d68.68 ± 0.54 b42.25 ± 11.22 a
W2F210.76 ± 0.58 a1.80 ± 0.13 a15.86 ± 0.42 a74.58 ± 0.71 a31.83 ± 0.63 a77.06 ± 0.86 a32.34 ± 13.89 a
W2F39.45 ± 1.02 ab1.67 ± 0.00 ab12.98 ± 0.91 c65.49 ± 0.67 bc29.53 ± 0.37 b63.07 ± 0.65 d30.21 ± 10.76 a
W3F16.88 ± 0.89 ef1.26 ± 0.07 bcde8.89 ± 0.49 f47.66 ± 0.21 i22.26 ± 0.00 f43.21 ± 0.52 j39.63 ± 3.15 a
W3F28.81 ± 0.06 bcd1.29 ± 0.10 bcde12.01 ± 0.27 cd61.02 ± 0.43 d22.86 ± 0.39 f58.39 ± 0.23 f43.43 ± 9.08 a
W3F38.82 ± 0.53 bcde1.52 ± 0.35 abc12.09 ± 0.56 d61.14 ± 0.06 d26.83 ± 0.68 cd63.99 ± 0.57 d32.24 ± 2.46 a
W4F18.69 ± 0.70 bcde1.56 ± 0.30 abc12.73 ± 0.10 c60.24 ± 0.42 d27.54 ± 0.34 c67.49 ± 0.88 b32.77 ± 9.66 a
W4F27.65 ± 0.60 cdef1.29 ± 0.01 bcde10.26 ± 1.17 e53.04 ± 0.80 f22.90 ± 0.49 f61.52 ± 1.34 e26.95 ± 6.06 a
W4F39.30 ± 0.50 abc1.48 ± 0.30 abcd12.87 ± 0.10 c64.46 ± 0.59 c26.25 ± 0.18 d66.05 ± 0.96 c29.25 ± 5.84 a
CKF17.60 ± 0.70 cdef1.43 ± 0.08 abcde8.44 ± 0.52 f52.69 ± 0.22 f25.25 ± 0.66 e49.80 ± 0.68 h34.50 ± 7.62 a
CKF27.94 ± 0.10 bcde0.97 ± 0.18 ef8.90 ± 0.70 f55.04 ± 0.74 e17.13 ± 0.80 i51.65 ± 0.50 g26.00 ± 5.76 a
CKF37.54 ± 0.03 cdef1.16 ± 0.16 cdef8.32 ± 0.20 f52.22 ± 0.57 f20.60 ± 0.73 g47.94 ± 0.69 i32.64 ± 4.66 a
W16.80 ± 0.89 d1.05 ± 0.25 d8.29 ± 1.03 d47.09 ± 4.41 e18.50 ± 3.91e40.28 ± 4.99 e34.87 ± 5.34 ab
W29.82 ± 0.76 a1.68 ± 0.18 a14.32 ± 1.41 a68.75 ± 4.46 a29.25 ± 2.40 a69.60 ± 6.12 a30.30 ± 6.04 b
W37.97 ± 1.00 bc1.37 ± 0.23 bc10.83 ± 1.52 c56.60 ± 6.72 c23.98 ± 2.19 c55.20 ± 9.32 c38.43 ± 6.99 a
W49.30 ± 0.50 b1.44 ± 0.24 b11.96 ± 1.40 b59.25 ± 5.03 b25.56 ± 2.1 b65.02 ± 2.85 b29.66 ± 6.89 b
CK7.70 ± 0.64 c1.19 ± 0.23 cd8.55 ± 0.52 d53.32 ± 1.39 d20.99 ± 3.58 d49.80 ± 1.70 d31.05 ± 6.57 b
F17.97 ± 1.21 a1.35 ± 0.24 ab10.66 ± 2.44 a55.21 ± 7.32 c23.94 ± 3.49 b54.67 ± 11.60 b33.56 ± 6.09 a
F28.16 ± 1.63 a1.25 ± 0.39 b10.80 ± 3.18 a57.01 ± 11.25 b21.77 ± 6.28 c56.48 ± 14.60 a32.47 ± 8.57 a
F38.37 ± 1.02 a1.43 ± 0.27 a10.92 ± 2.09 a58.78 ± 6.38 a25.26 ± 3.24 a56.79 ± 9.82 a32.55 ± 6.40 a
W0.0000.0000.0000.0000.0000.0000.029
F0.2780.0210.4350.0000.0000.0000.871
W*F0.0030.0030.0000.0000.0000.0000.249
Note(s): Different lowercase letters in the same column indicate significant differences among treatments (p < 0.05).

References

  1. Ronga, D.; Pentangelo, A.; Parisi, M. Optimizing N Fertilization to Improve Yield, Technological and Nutritional Quality of Tomato Grown in High Fertility Soil Conditions. Plants 2020, 9, 575. [Google Scholar] [CrossRef] [PubMed]
  2. Sun, X.; Ritzema, H.; Huang, X.; Bai, X.; Hellegers, P. Assessment of farmers water and fertilizer practices and perceptions in the North China Plain. Irrig. Drain. 2022, 71, 980–996. [Google Scholar] [CrossRef]
  3. Paul, W. Prospects for controlled application of water and fertiliser, based on sensing permittivity of soil. Comput. Electron. Agric. 2002, 36, 151–163. [Google Scholar] [CrossRef]
  4. Alordzinu, K.E.; Appiah, S.A.; Al Aasmi, A.; Darko, R.O.; Li, J.; Lan, Y.; Adjibolosoo, D.; Lian, C.; Wang, H.; Qiao, S.; et al. Evaluating the Influence of Deficit Irrigation on Fruit Yield and Quality Indices of Tomatoes Grown in Sandy Loam and Silty Loam Soils. Water 2022, 14, 1753. [Google Scholar] [CrossRef]
  5. Bai, C.; Zuo, J.; Watkins, C.B.; Wang, Q.; Liang, H.; Zheng, Y.; Liu, M.; Ji, Y. Sugar accumulation and fruit quality of tomatoes under water deficit irrigation. Postharvest Biol. Technol. 2023, 195, 112112. [Google Scholar] [CrossRef]
  6. Fu, H.; Cui, D.; Shen, H. Effects of Nitrogen Forms and Application Rates on Nitrogen Uptake, Photosynthetic Characteristics and Yield of Double-Cropping Rice in South China. Agronomy 2021, 11, 158. [Google Scholar] [CrossRef]
  7. Guo, H.X.; Liu, W.Q.; Shi, Y.C. Effects of different nitrogen forms on photosynthetic rate and the chlorophyll fluorescence induction kinetics of flue-cured tobacco. Photosynthetica 2006, 44, 140–142. [Google Scholar] [CrossRef]
  8. Qiqige, S.; Jia, L.; Qin, Y.; Chen, Y.; Fan, M. Effects of different nitrogen forms on potato growth and development. J. Plant Nutr. 2017, 40, 1651–1659. [Google Scholar] [CrossRef]
  9. Kowalska, I.; Sady, W. Effects of polyethylene film covering the greenhouse, nitrogen fertiliser form, and foliar nutrition on the yield and quality of lettuce. Folia Hortic. 2010, 22, 37–44. [Google Scholar] [CrossRef] [Green Version]
  10. Zhang, M.; Xiao, N.; Li, Y.; Niu, W.; Zhang, D.; Xu, Z.; Zhang, Z. Growth and Fruit Yields of Greenhouse Tomato under the Integrated Water and Fertilizer by Moistube Irrigation. Agronomy 2022, 12, 1630. [Google Scholar] [CrossRef]
  11. Du, Q.; Xiao, H.; Li, J.; Zhang, J.; Zhou, L.; Wang, J. Effects of different fertilization rates on growth, yield, quality and partial factor productivity of tomato under non-pressure gravity irrigation. PLoS ONE 2021, 16, e0247578. [Google Scholar] [CrossRef] [PubMed]
  12. Khapte, P.S.; Kumar, P.; Burman, U.; Kumar, P. Deficit irrigation in tomato: Agronomical and physio-biochemical implications. Sci. Hortic. 2019, 248, 256–264. [Google Scholar] [CrossRef]
  13. Luo, H.Y.; Li, F. Tomato yield, quality and water use efficiency under different drip fertigation strategies. Sci. Hortic. 2018, 235, 181–188. [Google Scholar] [CrossRef]
  14. Zhang, Q.; Wu, S.; Chen, C.; Shu, L.; Zhou, X.; Zhu, S. Regulation of nitrogen forms on growth of eggplant under partial root-zone irrigation. Agric. Water Manag. 2014, 142, 56–65. [Google Scholar] [CrossRef]
  15. Xu, G.; Jiang, M.; Lu, D.; Hezheng, W.; Chen, M. Nitrogen forms affect the root characteristic, photosynthesis, grain yield, and nitrogen use efficiency of rice under different irrigation regimes. Crop Sci. 2020, 60, 2594–2610. [Google Scholar] [CrossRef]
  16. Chen, C.; Xu, F.; Zhu, J.; Wang, R.; Xu, Z.Z.; Shu, L.; Xu, W. Nitrogen forms affect root growth, photosynthesis, and yield of tomato under alternate partial root-zone irrigation. J. Plant Nutr. Soil Sci. 2016, 179, 104–112. [Google Scholar] [CrossRef]
  17. Wang, F.; Kang, S.; Du, T.; Li, F.; Qiu, R. Determination of comprehensive quality index for tomato and its response to different irrigation treatments. Agric. Water Manag. 2011, 98, 1228–1238. [Google Scholar] [CrossRef]
  18. Viskelis, P.; Jankauskiene, J.; Bobinaite, R.; Karklina, D.; Venskutonis, P.R.; Vokk, R.; Verhe, R.; Lucke, F.K.; Kuka, P.; Rukshan, L.; et al. Content of carotenoids and physical properties of tomatoes harvested at different ripening stages. FOODBALT 2008, 2008, 166–171. [Google Scholar]
  19. Wang, C.; Gu, F.L.; Chen, J.; Yang, H.; Jiang, J.; Du, T.; Zhang, J. Assessing the response of yield and comprehensive fruit quality of tomato grown in greenhouse to deficit irrigation and nitrogen application strategies. Agric. Water Manag. 2015, 161, 9–19. [Google Scholar] [CrossRef]
  20. Zheng, J.; Qi, X.; Shi, C.; Yang, S.; Wu, Y. Tomato Comprehensive Quality Evaluation and Irrigation Mode Optimization with Biogas Slurry Based on the Combined Evaluation Model. Agronomy 2022, 12, 1391. [Google Scholar] [CrossRef]
  21. Eynizadeh, P.; Dehghani, H. Selecting elite tomato genotypes through a modified analytical hierarchy process. Crop Pasture Sci. 2020, 71, 822. [Google Scholar] [CrossRef]
  22. Jin, N.; Jin, L.; Wang, S.; Meng, X.; Ma, X.; Xianxia, H.; Zhang, G.; Luo, S.; Bi, J.; Yu, J. A Comprehensive Evaluation of Effects on Water-Level Deficits on Tomato Polyphenol Composition, Nutritional Quality and Antioxidant Capacity. Antioxidants 2022, 11, 1585. [Google Scholar] [CrossRef] [PubMed]
  23. Shan, B.; Guo, P.; Guo, S.; Li, Z. A Price-Forecast-Based Irrigation Scheduling Optimization Model under the Response of Fruit Quality and Price to Water. Sustainability 2019, 11, 2124. [Google Scholar] [CrossRef] [Green Version]
  24. Orouskhani, M.; Teshnehlab, M.; Nekoui, M.A. Evolutionary dynamic multi-objective optimization algorithm based on Borda count method. Int. J. Mach. Learn. Cybern. 2019, 10, 1931–1959. [Google Scholar] [CrossRef]
  25. Chand, J.B.; Hewa, G.; Hassanli, A.M.; Myers, B. Evaluation of Deficit Irrigation and Water Quality on Production and Water Productivity of Tomato in Greenhouse. Agriculture 2020, 10, 297. [Google Scholar] [CrossRef]
  26. Liu, H.; Li, H.; Ning, H.; Zhang, X.; Li, S.; Pang, J.; Wang, G.; Sun, J. Optimizing irrigation frequency and amount to balance yield, fruit quality and water use efficiency of greenhouse tomato. Agric. Water Manag. 2019, 226, 105787. [Google Scholar] [CrossRef]
  27. Takács, S.; Pék, Z.; Csányi, D.; Daood, H.G.; Szuvandzsiev, P.; Palotás, G.; Helyes, L. Influence of Water Stress Levels on the Yield and Lycopene Content of Tomato. Water 2020, 12, 2165. [Google Scholar] [CrossRef]
  28. Du, Y.; Cao, H.; Liu, S.; Gu, X.; Cao, Y. Response of yield, quality, water and nitrogen use efficiency of tomato to different levels of water and nitrogen under drip irrigation in Northwestern China. J. Integr. Agric. 2017, 16, 1153–1161. [Google Scholar] [CrossRef] [Green Version]
  29. Fang, L.; Wei, K.; Feng, L.; Tu, K.; Peng, J.; Wang, J.; Pan, L. Optical Absorption and Scattering Properties at 900–1650 nm and Their Relationships with Soluble Solid Content and Soluble Sugars in Apple Flesh during Storage. Foods 2020, 9, 1881. [Google Scholar] [CrossRef]
  30. Panthee, D.R.; Labate, J.A.; Robertson, L.W. Evaluation of tomato accessions for flavour and flavour-contributing components. Plant Genet. Resour. 2013, 11, 106–113. [Google Scholar] [CrossRef] [Green Version]
  31. Oesper, R.E. Kjeldahl and the determination of nitrogen. J. Chem. Educ. 1934, 11, 457. [Google Scholar] [CrossRef]
  32. Hanping, M.; Wenjing, Z.; Hongyu, L. Determination of nitrogen and potassium content in greenhouse tomato leaves using a new spectro-goniophotometer. Crop Pasture Sci. 2014, 65, 888. [Google Scholar] [CrossRef]
  33. Willard, H.H.; Van Lente, K.; Van Atta, R.E. An experiment in flame photometry. J. Chem. Educ. 1957, 34, 192. [Google Scholar] [CrossRef]
  34. Hou, M.; Lin, Z.; Chen, J.; Zhai, Y.; Jin, Q.; Zhong, F. Optimization on theBuried Depth of Subsurface Drainage under Greenhouse Condition Based on Entropy Evaluation Method. Entropy 2018, 20, 859. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  35. Pramanik, S.; Lai, S.; Ray, R.L.; Patra, S.K. Effect of Drip Fertigation on Yield, Water Use Efficiency, and Nutrients Availability in Banana in West Bengal, India. Commun. Soil Sci. Plant Anal. 2016, 47, 1691–1700. [Google Scholar] [CrossRef]
  36. Wang, Y.; De Gil, P.R.; Chen, Y.; Kromrey, J.D.; Kim, E.K.; Pham, T.S.; Nguyen, D.N.; Romano, J.L. Comparing the Performance of Approaches for Testing the Homogeneity of Variance Assumption in One-Factor ANOVA Models. Educ. Psychol. Meas. 2017, 77, 305–329. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  37. LaMotte, L.R. Proportional subclass numbers in two-factor ANOVA. Statistics 2018, 52, 228–238. [Google Scholar] [CrossRef]
  38. Wang, X.; Xing, Y. Evaluation of the effects of irrigation and fertilization on tomato fruit yield and quality: A principal component analysis. Sci. Rep. 2017, 7, 350. [Google Scholar] [CrossRef] [Green Version]
  39. Liu, R.; Kuang, J.J.; Gong, Q.; Hou, X.L. Principal component regression analysis with spss. Comput. Methods Programs Biomed. 2003, 71, 141–147. [Google Scholar] [CrossRef]
  40. Sivakumar, J.; Prashanth, J.; Rajesh, N.; Reddy, S.; Pinjari, O.B. Principal component analysis approach for comprehensive screening of salt stress-tolerant tomato germplasm at the seedling stage. J. Biosci. 2020, 45, 141. [Google Scholar] [CrossRef]
  41. Li, X.; Ma, J.; Zheng, L.; Chen, J.; Sun, X.; Guo, X. Optimization of the Regulated Deficit Irrigation Strategy for Greenhouse Tomato Based on the Fuzzy Borda Model. Agriculture 2022, 12, 324. [Google Scholar] [CrossRef]
  42. Chen, G.; Lou, Q.; Su, X.; Sun, H.; Xu, C.; Li, S.; Zhao, J.; Qiao, H.; Wang, Y.; Liang, Y. Research Progress on Tomato Fruits Flavor Substance Composition and Its Influencing Factors. China Veg. 2022, 7, 23–33. [Google Scholar] [CrossRef]
  43. Coyago-Cruz, E.; Meléndez-Martínez, A.J.; Moriana, A.; Girón, I.; Martín-Palomo, M.; Galindo, A.; Pérez-López, D.; Torrecillas, A.; Sinchiguano, E.B. Yield response to regulated deficit irrigation of greenhouse cherry tomatoes. Agric. Water Manag. 2019, 213, 212–221. [Google Scholar] [CrossRef]
  44. Colimba-Limaico, J.E.; Zubelzu-Minguez, S.; Rodríguez-Sinobas, L. Optimal Irrigation Scheduling for Greenhouse Tomato Crop (Solanum Lycopersicum L.) in Ecuador. Agronomy 2022, 12, 1020. [Google Scholar] [CrossRef]
  45. Wu, Y.; Yan, S.; Fan, J.; Zhang, F.; Zhao, W.; Zheng, J.; Guo, J.; Xiang, Y.; Wu, L. Combined effects of irrigation level and fertilization practice on yield, economic benefit and water-nitrogen use efficiency of drip-irrigated greenhouse tomato. Agric. Water Manag. 2022, 262, 107401. [Google Scholar] [CrossRef]
  46. Ayankojo, I.T.; Morgan, K.T. Optimizing Tomato Growth and Productivity Using Nitrogen and Irrigation Application Timing. Agronomy 2021, 11, 1968. [Google Scholar] [CrossRef]
  47. Cheng, M.; Wang, H.; Fan, J.; Xiang, Y.; Liu, X.; Liao, Z.; Abdelghany, A.F.; Zhang, F.; Li, Z. Evaluation of AquaCrop model for greenhouse cherry tomato with plastic film mulch under various water and nitrogen supplies. Agric. Water Manag. 2022, 274, 107949. [Google Scholar] [CrossRef]
  48. Wang, X.; Yun, J.; Shi, P.; Li, Z.; Li, P.; Xing, Y. Root Growth, Fruit Yield and Water Use Efficiency of Greenhouse Grown Tomato Under Different Irrigation Regimes and Nitrogen Levels. J. Plant Growth Regul. 2019, 38, 400–415. [Google Scholar] [CrossRef]
  49. Xu, X.; Li, Q.; Song, X.; Qi-Rong, S.; Cai-Xia, D. Dynamic Regulation of Nitrogen and Organic Acid Metabolism of Cherry Tomato Fruit as Affected by Different Nitrogen Forms. Pedosphere 2012, 22, 67–78. [Google Scholar] [CrossRef]
  50. Han, K.; Han, X.; Curtis, D.J.; Kleinman PJ, A.; Tang, B.Z.; Wang, L. Impact of Irrigation, Nitrogen Fertilization, and Spatial Management on Maize. Agron. J. 2016, 108, 1794–1804. [Google Scholar] [CrossRef]
  51. Naghdyzadegan Jahromi, M.; Razzaghi, F.; Zand-Parsa, S. Strategies to increase barley production and water use efficiency by combining deficit irrigation and nitrogen fertilizer. Irrig. Sci. 2022, 41, 261–275. [Google Scholar] [CrossRef]
  52. Ochieng, I.O.; Gitari, H.I.; Mochoge, B.; Rezaei-Chiyaneh, E.; Gweyi-Onyango, J.P. Optimizing Maize Yield, Nitrogen Efficacy and Grain Protein Content under Different N Forms and Rates. J. Soil Sci. Plant Nutr. 2021, 21, 1867–1880. [Google Scholar] [CrossRef]
  53. Dai, J.; Duan, L.; Dong, H. Comparative Effect of Nitrogen Forms on Nitrogen Uptake and Cotton Growth Under Salinity Stress. J. Plant Nutr. 2015, 38, 1530–1543. [Google Scholar] [CrossRef]
Figure 1. Schematic diagram of planting. Its ridge height was 200 mm, its bottom width was 700 mm, and its top width was 600 mm. Tomatoes were planted on the ridge surface, with a row spacing of 500 mm.
Figure 1. Schematic diagram of planting. Its ridge height was 200 mm, its bottom width was 700 mm, and its top width was 600 mm. Tomatoes were planted on the ridge surface, with a row spacing of 500 mm.
Water 15 01546 g001
Figure 2. Tomato growth stages.
Figure 2. Tomato growth stages.
Water 15 01546 g002
Figure 3. Experimental design.
Figure 3. Experimental design.
Water 15 01546 g003
Figure 4. Air temperature and humidity in solar greenhouse.
Figure 4. Air temperature and humidity in solar greenhouse.
Water 15 01546 g004
Figure 5. Cumulative daily water usage curves for different treatments.
Figure 5. Cumulative daily water usage curves for different treatments.
Water 15 01546 g005aWater 15 01546 g005b
Figure 6. Effect of different treatments on irrigation water use effciency and nutrient use efficiency of tomatoes. Different lowercase letters in the same column indicate significant differences among treatments (p < 0.05). Values with the same letters are not significantly different. The multiplication sign represents there is an interaction effect. The detailed data can be found at Appendix A.
Figure 6. Effect of different treatments on irrigation water use effciency and nutrient use efficiency of tomatoes. Different lowercase letters in the same column indicate significant differences among treatments (p < 0.05). Values with the same letters are not significantly different. The multiplication sign represents there is an interaction effect. The detailed data can be found at Appendix A.
Water 15 01546 g006
Figure 7. The comprehensive evaluation score and ranking using the fuzzy Borda method.
Figure 7. The comprehensive evaluation score and ranking using the fuzzy Borda method.
Water 15 01546 g007
Figure 8. Quadratic regression curve of quality compressive score and yield. The blue dots represent the final evaluation including quality scores and yields for all treatments.
Figure 8. Quadratic regression curve of quality compressive score and yield. The blue dots represent the final evaluation including quality scores and yields for all treatments.
Water 15 01546 g008
Table 1. Soil nutrient contents.
Table 1. Soil nutrient contents.
Depth
(cm)
Organic Matter
(g/kg)
Available
Nitrogen
(mg/kg)
Available
Phosphorus
(mg/kg)
Available
Potassium
(mg/kg)
pHElectrical Conductivity, EC
(uS/cm)
0–2013.5054.8321.501797.72177.20
20–4016.6068.3217.901887.81179.80
40–6012.0057.3426.801727.74246.20
60–8011.6056.5319.301967.86232.20
Table 2. Experimental design.
Table 2. Experimental design.
Irrigation LevelSoil Moisture Content When Irrigation StartedSoil Moisture Content When Irrigation StoppedNitrogen Fertilizer TreatmentAmount of Nitrogen Applied in Different Forms/kg·hm−2
W150%FC90%FCF1Urinary ammonia nitrogen 610.31
F2Calcium nitrate 1302
F3Ammonium sulfate 930
W260%FC90%FCF1Urinary ammonia nitrogen 610.31
F2Calcium nitrate 1302
F3Ammonium sulfate 930
W370%FC90%FCF1Urinary ammonia nitrogen 610.31
F2Calcium nitrate 1302
F3Ammonium sulfate 930
W480% FC90%FCF1Urinary ammonia nitrogen 610.31
F2Calcium nitrate 1302
F3Ammonium sulfate 930
CKCommonly used local drip irrigation systemF1Urinary ammonia nitrogen 610.31
F2Calcium nitrate 1302
F3Ammonium sulfate 930
Table 3. The soil field capacity of each plot.
Table 3. The soil field capacity of each plot.
Irrigation LevelField Capacity Determined Using a Ring Knife
(%)
Field Capacity Determined by the Monitoring Equipment
(%)
Comparison of ResultsRelative Error
(%)
W139.19 ± 1.74 a39.31−0.12−0.31
W237.01 ± 1.34 a36.900.110.30
W341.16 ± 1.33 a41.97−0.81−1.97
W437.88 ± 2.05 a37.800.080.21
Note(s): Values represent mean ± standard deviation. Different lowercase letters a indicate significant differences among treatments (p < 0.05).
Table 4. Effects of different treatments on tomato yield and quality.
Table 4. Effects of different treatments on tomato yield and quality.
Irrigation LevelNitrogen
Fertilizer Treatment
Yield per Plant
(kg/Plant)
Vc
(mg/100 g)
Soluble Sugar
(g/100 g)
TSS
(%)
Sugar–Acid RatioLycopene
(mg/100 g)
W1F13.82 ± 0.85 abc38.40 ± 1.96 cde32.73 ± 1.59 bc4.17 ± 0.06 f9.70 ± 0.47 bc12.20 ± 0.20 cde
F22.88 ± 0.64 c36.14 ± 1.96 def37.60 ± 1.38 a5.00 ± 0.17 b11.14 ± 0.41 a15.20 ± 0.40 b
F33.62 ± 0.52 abc40.66 ± 0.00 bc30.39 ± 0.60 cd4.60 ± 0.00 cde8.15 ± 0.90 cd16.10 ± 0.30 b
W2F15.14 ± 1.37 ab36.14 ± 1.96 def28.24 ± 0.61 d4.20 ± 0.100 f8.36 ± 0.18 cd11.53 ± 0.35 def
F23.94 ± 1.69 abc42.91 ± 1.96 b29.22 ± 1.44 d4.50 ± 0.17 de7.09 ± 0.28 d17.50 ± 0.60 a
F33.68 ± 1.31 abc35.01 ± 1.96 ef30.13 ± 1.00 cd4.43 ± 0.06 e8.50 ± 0.80 cd11.93 ± 0.25 cdef
W3F15.20 ± 0.41 ab32.75 ± 1.96 fg27.76 ± 1.41 d4.03 ± 0.06 f7.46 ± 1.20 d17.57 ± 0.95 a
F25.70 ± 1.19 a41.79 ± 1.96 bc37.68 ± 1.66 a4.73 ± 0.06 c9.57 ± 0.42 bc10.53 ± 1.05 ef
F34.23 ± 0.32 abc30.49 ± 0.00 g26.80 ± 0.65 d4.60 ± 0.10 cde6.80 ± 0.16 d10.53 ± 1.05 ef
W4F14.44 ± 1.31 abc38.40 ± 1.96 cde26.59 ± 0.56 d3.07 ± 0.06 g5.47 ± 0.46 e13.20 ± 0.40 cd
F23.65 ± 0.82 abc39.53 ± 1.96 bcd28.69 ± 2.77 d4.17 ± 0.06 f8.50 ± 0.82 cd13.63 ± 0.55 c
F33.96 ± 0.79 abc27.10 ± 0.00 h17.88 ± 2.17 e4.00 ± 0.00 f5.30 ± 0.64 e13.67 ± 1.25 c
CKF13.46 ± 0.90 bc39.53 ± 1.96 bcd37.84 ± 3.08 a5.10 ± 0.10 b8.41 ± 0.69 cd10.37 ± 0.90 f
F23.31 ± 1.16 bc47.43 ± 0.00 a39.04 ± 0.48 a5.40 ± 0.10 a10.46 ± 0.96 ab12.80 ± 0.80 cd
F33.20 ± 0.56 bc36.14 ± 1.96 def33.93 ± 1.24 b4.70 ± 0.10 cd9.55 ± 0.56 bc12.10 ± 0.20 cdef
Irrigation levelW13.44 ± 0.73 b38.40 ± 2.40 b33.58 ± 3.37 b4.59 ± 0.37 b9.66 ± 1.40 a14.50 ± 1.79 a
W24.25 ± 1.44 ab38.02 ± 4.07 b29.19 ± 1.24 d4.38 ± 0.17 c7.98 ± 0.80 b13.66 ± 2.91 b
W35.04 ± 0.92 a35.01 ± 5.36 c30.75 ± 5.34 c4.46 ± 0.33 c7.94 ± 1.37 b13.07 ± 3.49 b
W44.01 ± 0.93 b35.01 ± 6.11 c24.39 ± 5.27 e3.74 ± 0.52 d6.42 ± 1.66 c13.50 ± 0.75 b
CK3.32 ± 0.80 b41.03 ± 5.21 a36.94 ± 2.86 a5.07 ± 0.32 a9.47 ± 1.11 a11.76 ± 1.25 c
Nitrogen fertilizer treatmentF14.41 ± 1.13 a37.04 ± 2.99 b30.63 ± 4.55 b4.11 ± 0.67 c7.88 ± 1.54 b12.97 ± 2.62 b
F23.90 ± 1.40 a41.56 ± 4.14 a34.45 ± 4.89 a4.76 ± 0.45 a9.35 ± 1.58 a13.93 ± 2.49 a
F33.74 ± 0.75 a33.88 ± 4.96 c27.83 ± 5.75 c4.47 ± 0.26 b7.66 ± 1.62 b12.98 ± 1.93 b
pW0.0070.0000.0000.0000.0000.000
F0.1710.0000.0000.0000.0000.001
W*F0.670.0000.0000.0000.0000.000
Note(s): Different lowercase letters in the same column indicate significant differences among treatments (p < 0.05). Values with the same letters are not significantly different. The multiplication sign represents there is an interaction effect.
Table 5. Spearman’s correlation between indicators.
Table 5. Spearman’s correlation between indicators.
No.U1U2U3U4U5U6U7U8U9U10
U11
U2−0.2191
U3−0.579 *0.614 *1
U4−0.558 *0.4530.852 **1
U5−0.527 *0.3710.833 **0.603 *1
U6−0.0750.032−0.293−0.37−0.2041
U70.557 *−0.0610.007−0.057−0.077−0.351
U80.429−0.005−0.361−0.166−0.45−0.2810.0071
U90.432−0.147−0.579 *−0.386−0.745 **−0.1180.0890.789 **1
U100.493–0.144−0.536 *−0.376−0.570 *−0.1950.0640.929 **0.796 **1
Note(s): “*” indicates a significant correlation at the p < 0.05 level, and “**” indicates a highly significant correlation at the p < 0.01 level.
Table 6. Principal component variance interpretation of tomato quality indicators under each treatment.
Table 6. Principal component variance interpretation of tomato quality indicators under each treatment.
No.EigenvalueVariance Interpretation Rate (%)Cumulative Variance
Interpretation Rate (%)
U22.99859.96559.965
U31.03820.75780.723
U40.58211.63192.354
U50.2975.93298.286
U60.0861.714100.000
Table 7. Principal component variance interpretation of water and fertilizer use efficiency under each treatment.
Table 7. Principal component variance interpretation of water and fertilizer use efficiency under each treatment.
No.EigenvalueVariance Interpretation Rate (%)Cumulative Variance Interpretation Rate (%)
U72.77369.31669.316
U80.98424.59193.906
U90.1874.68598.591
U100.0561.409100.000
Table 8. Rankings and scores reflecting the three dimensions of tomato.
Table 8. Rankings and scores reflecting the three dimensions of tomato.
Irrigation LevelNitrogen Fertilizer TreatmentTomato Quality IndicatorWater and Fertilizer Use Efficiency IndicatorYield Indicator
ScoreRankingScoreRankingYieldRanking
W1F10.3027−1.735143.8238
F21.4702−3.258152.88215
F30.4286−1.170113.61811
W2F1−0.538111.74525.1443
F20.29783.12213.9377
F3−0.299101.53333.67810
W3F1−0.82812−1.256125.1962
F21.15430.51175.6951
F3−1.275131.01264.2275
W4F1−1.731141.21244.4354
F2−0.1019−0.22483.6479
F3−2.738151.19953.9586
CKF10.9294−0.36593.45812
F22.4441−1.257133.30913
F30.4855−1.071103.19514
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Huang, Y.; Yang, Y.-R.; Yu, J.-X.; Huang, J.-X.; Kang, Y.-F.; Du, Y.-R.; Tian, G.-Y. Interaction of the Coupled Effects of Irrigation Mode and Nitrogen Fertilizer Format on Tomato Production. Water 2023, 15, 1546. https://doi.org/10.3390/w15081546

AMA Style

Huang Y, Yang Y-R, Yu J-X, Huang J-X, Kang Y-F, Du Y-R, Tian G-Y. Interaction of the Coupled Effects of Irrigation Mode and Nitrogen Fertilizer Format on Tomato Production. Water. 2023; 15(8):1546. https://doi.org/10.3390/w15081546

Chicago/Turabian Style

Huang, Yuan, Ying-Ru Yang, Jing-Xin Yu, Jia-Xuan Huang, Yi-Fan Kang, Ya-Ru Du, and Guo-Ying Tian. 2023. "Interaction of the Coupled Effects of Irrigation Mode and Nitrogen Fertilizer Format on Tomato Production" Water 15, no. 8: 1546. https://doi.org/10.3390/w15081546

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop